ASC: Mechanical Engineering

  • Shreyas Puttappa Mulagund, Harinath Sri Parasha, Sharath Chandra, Kumar Kenche Gowda “  Investigation of Structural Integrity In a Circumferntial Entry Blade of a Turbine Rotor” Proceedings of ASME Power and Energy Conference, Power Energy 2018, Lake Buena Vista FL USA, June 24-28, 2018.
  •  A V Pavankumar, R Suraj, Puneeth Kumar, H S Shiva Prasad and Kumar K Gowda “Parametric Optimization of FSAE Restrictor for Random Vibrational Analysis” Springer Science+ Business Media , Innovative Design and Development Practices in Aerospace and Automotive Engineering, Lecture Notes in Mechanical Engineering, Singapore- 2017.
  • Harinath S P, Kumar K Gowda, Sharath Chandra G V, Shreyas P M “ Evaluation of over speed, Burst Margin and Estimation of Low Cycle Fatigue Life of an Aero Engine Disc” ASME 2017 Turbo Expo, Turbomachinery Technical Conference and Exposition, Charlotte, NC USA, June -2017.
  • Vinayaka N, Kumar K Gowda, Nilotpal Banerjee, B S Ajay Kumar “ Response    Evaluation for Mechanical Integration of partial Arc Packeted Shrouded HP Compressor Blades In a Gas Engine Rotor”  ASME 2017 Turbo Expo, Turbomachinery Technical Conference and Exposition, Charlotte, NC USA, June -2017.
  • Vinayaka N, Kumar K Gowda, Nilotpal Banerjee, B S Ajay Kumar “Contact Stress Evaluation of Gas Turbine HP Rotor Shroud Configuration And its Economic Feasibility” Power and Energy Conference and Exhibition, International Conference on Power Engineering, ASME, Charlotte, NC USA, June -2017.
  1. Srinivas, M.S.Bhagyashekar and S.M.Mahesh “Effect of Mono and Hybrid Fillers on Tensile Properties of Filled Epoxy Composites” Proc. of Int. Conf. on Current Trends in Eng., Science and Technology, ICCTEST, 2017.1.31
  • Vinayaka N, Nilotpal Banarjee, B S Ajay Kumar and Kumar K Gowda “ Aero Structure Interaction of HP compressor blades In a Gas Engine Rotor” Springer India, CAD/CAM Robotics and Factories of the future, Lecture Notes in Mechanical Engineering, 2016.
  • Veeresh Murthy, Kalmeshwar Ullegaddi, Mahesh B , B M Rajaprakash                    “ Applications of Image Processing and Acoustic Emission Technique in Monitoring of Friction Stir Welding process” ICAAMM-2016, Elsevier, Materials today, Proceedings, MLRIT, Hyderabad, July 2016.
  • Kalmeshwar Ullegaddi, Veeresh Murthy, Harsha R N, Manjunaha “Friction stir welding tool design and their effect on welding of AA 6082-T6” ICAAMM-2016, Elsevier, Materials today, Proceedings, MLRIT, Hyderabad, July 2016.
  • Kalmeshwar Ullegaddi, Veeresh Murthy, Harsha R N, Manjunatha “Friction stir welding tool design and their effect on welding of AA 6082-T6” ICAAMM-2016, Elsevier, Materials today, Proceedings, MLRIT, Hyderabad, July 2016.
  • Kumar K Gowda, S L Ajith Prasad, Vinayaka N “ Design Optimization of T-root Geometry of a Gas Engine HP Compressor Rotor Blade for lifing the Blade against Frettigue Failure” ASME 2016, Power and Energy, conference and Exhibition, Charlotte, NC USA, June – 2016.
  •   Vinayaka N, Nilotpal Banerjee, B S Ajay Kumar, Kumar K Gowda “ Aero Structure Interaction for Mechanical Integration of Laced LP compressor blades in a Ga Engine Rotor” ASME 2016, Power and Energy, conference and Exhibition, Charlotte, NC USA, June – 2016.
  • Vinayaka N, Niloptal Banerjee,  B S Ajay Kumar, Kumar K Gowda, Tulasidas D “ Transient Stress Analysis and High Cycle Fatigue life Estimation of a Gas turbine shrouded HP compressor blade.” ASME 2016, Power and Energy, conference and Exhibition, Charlotte, NC USA, June – 2016.
  • Vinayaka N, Nilotopal Banerjee, B S Ajay Kumar , Kumar K Gowda “ Effect of Blade deflection angles, pressure drop, Flow and Work Co-efficient on stage Performance of a Gas turbine Shrouded HP Compressor Blade” ASME 2016, Power and Energy, conference and Exhibition, Charlotte, NC USA, June – 2016.
  • Veeresh Murthy, Kalmeshwar U, B M Rajaprakash, R Rajashekar “ Study on influence of concave geometry shoulder tool in friction stir welding (FSW) by using Image Processing and Acoustic Emission Technique” ICAMM-2016, Elsevier, Materials today, Proceedings, Osmania University, Hyderabad,  2016.
  1. Srinivas,M.S.Bhagyashekar“Effects of Mono(Al/Cu) Metallic and Hybrid(Al-Cu) Metallic Fillers on Tribological Performance of Epoxy Composites “Proceedings of ICMIGM 2015, 11 & 12 Dec 2015, Sengunthar Engineering College, Erode
  • Prakash Rao C R, Bhagyashekar M S, Ravikumar D V,V. Ravikumar, Narendra Viswanath “Experimental Study on Intermittent Turning of Aluminum Metal Matrix Composites Using Cryogenic Treated Carbide Inserts” Proceedings of ICMIGM 2015, 11 & 12 Dec 2015, Sengunthar Engineering College, Erode.
  • Venkatesh BN, Bhagyashekar.M. S“Studies on Microstructure and Mechanical Properties of Friction Stir Welded AA6061 Composites Containing SiC”Proc of 1stNational Conference on Trends and Innovations in Automation, Materials and Thermal Engineering (TIAMTE – 2015) 21-22 May 2015.
  • PrakashRao.C. R, Bhagyashekar.M. S, Ravikumar.D. V, NarendraViswanath, “Influence of Cutting Speed on Tool Life While Turning Aluminum Composites Containing Varied percent Fly ash”, Proc of 1stNational Conference on Trends and Innovations in Automation, Materials and Thermal Engineering (TIAMTE – 2015)21-22 May 2015 page MS18-22.
  • ThanujKumar M., M.S. Bhagyashekar “Tribological Behaviour of Epoxy Composite Containing Fly-Ash/Silicon Carbide Particulates”, Proc of 1stNational Conference on Trends and Innovations in Automation, Materials and Thermal Engineering (TIAMTE – 2015), 21-22 May 2015 page MS28-32.
  •  
  • S.G. Sangashetty, Pramod V.K, ShankarReddy, M.S. Baghyashekar, “Design and Fabrication of Conceptualization of Miniature Winnowing Machine”, National Conference on Emerging Trends in Mechanical and Materials Engineering-NCETMME-2014, BEC, Basavakalyana, 30-31 Oct 2014.
  • S.G. Sangashetty, B.D Wadekar, ShankarReddy, M.S. Baghyashekar, “Design & Fabrication of Solar Powered Hovercraft National Conference on Emerging Trends in Mechanical and Materials Engineering-NCETMME-2014, BEC, Basavakalyana, 30-31 Oct 2014.
  • Maya Salimath G, Bhagyashekar M.S “Outcome Based education: Imperative for transforming higher education in India” Two-day national seminar on Higher Education Transformation in India on 28-29 April 2014 Indian Academy Degree College, Bangalore.
  • Sunil Kumar M, S G Gopalkrishna, Shivakumar H R, Devaraju G P “ characterization of Chemically Treated Natural Fiber Reinforced Epoxy Composite” Proceeding of International Conference on current trends in Engineering and Management, ICCTEM-2014, VVCE, Mysore, Karnataka.
  • G Sangashetty, B D Wadekar, R ShankarReddy, M S Bhagyashekar, “Design and Fabrication of Eco friendly Heater and Cooler”, National Conference on Innovations & Challenges in Civil Engineering-ICICE 13, RRCE-Bangalore, 26-27 Sep 2013.
  • S.G. Sangashetty, N. SreenivasuluReddy, R. ShankarReddy, M.S.Bagyashekar, “Material Optimization of Diesel Engine Piston” 2nd National Conference on Innovation in Mechanical Engineering. MITS, Madanapalli, ISBN978-93-82163-75-6, P24-28
  • PrakashRao C.R.,Bhagyashekar M.S, Narendra Viswanath, Rajagopal M.S “Effectof Rake Angle on the Surface finish and cutting force while machining Aluminum – Fly-Ash Composite” International Conference on Advanced materials, Manufacturing, Management & Thermal Sciences (2013) ISBN 13978-81-926304 0.3 Siddaganga Institute of Technology, Tumkur, Karnataka.
  • C.R.PrakashRao, Bhagyashekar.M. S, NarendraViswanath “Performance of Cryogenically Treated & Untreated Tungsten Carbide Inserts in Interrupted Machining” National Conference on “Emerging Trends in Mechanical Engineering” – ETME 12, “(2012) 41-47, ISBN: 978-93-5051-654-6
  • ThanujKumar.M, Bhagyashekar.M. S “Microwave cure processed polymer composites – a Review” National conference on “Emerging Trends in Mechanical Engineering” ETME’12“(2012)41-47, ISBN: 978-93-5051-654-6
  • VeereshKumar.G, C.S.P.Rao, Selvaraj.N, Bhagyashekar.M.S., “Wear Resistance Assessment of Al6061-SiC Composites using Wear Endurance Index”, Proceedings of “International Conference on Materials, Mechanics and Management (IMMM2010)”, 14th to 16th, January, 2010, at College of Engineering Trivandrum, Tiruvananthapuram, Kerala.
  • C.R. Prakash Rao, Bhagyashekar.M. S, and NarendraViswanath,” Investigative Studies on Machining of En8 Steel Brazed Cutting Tools an Experimental Approach” proceedings of National Conference, AME – 09, 30th – 31st March 2009, Don Bosco Institute of Technology, Bangalore.
  • C.R. Prakash Rao, Bhagyashekar.M. S,  N.Nagaraja,” Influence of Back Rake Angle on Forces and Chip Thickness Ratio- Experimental Approach” National Conference, AME – 09, 30th – 31st March 2009, Don Bosco Institute of Technology, Bangalore
  • VeereshKumar.G. B, Casper, Selvaraj.N, Bhagyashekar.M.S., “Studies on Physical & Tribological Properties of Al6061-SiC Composites”, proceedings of an International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009) 19th to 21st Nov 2009, at Jnana Jyothi Auditorium, Bangalore University, Bangalore, India.
  • VeereshKumar.G. C.S.P. Rao, Bhagyashekar.M. S, Selvaraj.N “Mechanical and Tribological Behaviour of Al7075-Al2O3 Composites”, proceedings of the 2nd International Conference on Recent Advances in Materials Processing Technology (RAMPT’09) February 25th – 27th, 2009, National Engineering College, K.R. Nagar, Kovilpatti, Tamil Nadu, India.
  • VeereshKumar.G. B, C.S.P. Rao, Bhagyashekar.M.S., Selvaraj.N “Mechanical and Tribological Behaviour of Al6061-SiCp Composites”, proceedings of the International Conference on Recent Trends in Materials and Mechanical Engineering (ICMM2008) 18-20 December 2008, Dr. Mahalingam College of Engineering and Technology, Pollachi, Tamil Nadu, India.
  • VeereshKumar.G. B, C.S.P. Rao, Bhagyashekar.M.S., Selvaraj.N “Mechanical Properties of Particulate Reinforced (Al6061-Al2O3p and Al7075-SiCp) Composites”, proceedings of the International Conference on Micro Electro Mechanical Systems (MEMS – 08) 22nd – 23rd October 2008, Anjuman Engineering College, Bhatkal, Karnataka, India.
  • C.R. Prakash Rao, N. Nagaraj, Bhagyashekar. M. S, “Effect of Back Rake    Angle on Cutting Force and Surface Finish in Turning Application” Proc. of Nat. Conf. ETIME, BMS College of Engineering, Bangalore Aug 28-29, 2008
  • Venkatesh B.N., Bhagyashekar.M. S, “Residual Stress Analysis of Single Pass Butt Joint Welded Plate Using ANSYS”, National Conference on Challenges in 2020-Mechanical Engineering Perspective, AVC College of Engineering, Mannampandal, Mayiladuthurai, TN, India, 14 & 15 March 2008
  • Bhagyashekar, Castrates, Saleemkhan, “Preliminary studies on stress corrosion failure of Al Alloy-SiC composites”, National conference on Mechanical Engineering, NATCN.ME-2004, MSRIT, Bangalore, Mar. 2004
  • Bhagyashekar.M. S, C.S. Ramesh, A. Ramachandra, “Machinability of metal matrix composites”, National Conference on ‘Advances in Mechanical Engineering’, NAME-2004, JNNCE, Shimoga, 12-14 Feb. 2004.
  • Bhagyashekar. M. S, C.S.Ramesh, “Tool wear during turning of MMCs”, National Seminar on Liquid crystals, Polymer and composites organized by Ghousia College of Engineering, Ramanagaram, Sept. 18th – 20th 2003
  • Bhagyashekar. M. S, C.S. Ramesh, A. Ramachandra “Surface Roughness Studies on Al-12.5% Si Alloy-SiC/graphics/CaF2”, Proc. of International Conference on Manufacturing, Dhaka, August (2002), 21
  • Bhagyashekar. M. S, C.S.Ramesh, A.Ramachandra & K Chandrashekhar, Wear Characteristics H.S.S. cutting tool during Turning operation of cast Al  alloy – SiC/Gr Composites”, Proc. of 2nd International Conference on Industrial Tribology, Hyderabad. India Dec. (1999) 306
  • Bhagyashekar.M. S, C.S. Ramesh, A. Ramachandra “Wear Characteristics of H.S.S. Cutting Tool During Turning Operation of Cast Al alloy – SiC Composites” 52nd Annual Technical Meet, Indian Institute of Metals, I.I.Sc. Bangalore.  Nov 1998.

Leave a Reply

Your email address will not be published. Required fields are marked *