AJ: Mechanical Engineering

  • Manjunatha R, Panduranga Murthy G, Byregowda H V, Rajesh Kumar, Leelaja B C, “ Bio diesel production and performance analysis of IC engine running on diesel fuel blended with different fractions of esterified gingili oil” SJEAT, ISSN 2415-6264, Jan 2018.
  • Thousif Ahmed, Panduranga Murthy G , Rajesh Kumar, Manjunatha R “Bio-Ethanol Derived From Less Edible Fruit Cultivars Of Coorg District And Parametric Analysis Using IC Engines Fuelled With Bio-Ethanol-Diesel Blends” SJLS, ISSN 2415-6221, Jan 2018.
  1. Srinivas, Bhagyashekar M S “Effect of particulates of Aluminium, Copper and hybrid (Aluminium-Copper) on Thermal conductivity of epoxy”, Materials Today-Proceedings 4(2017) 9519-23.
  • Pavan Kumar Reddy, M S Bhagyashekar, “Development of Biomass Briquetting Technology for Northern regions of Karnataka using Tamarind seed powder as binder”, Journal of Advances in Science and Technology, Vol. 12, Issue 25, p353, Dec 2016.
  • Shivalingaswamy B P, Narahari G A, “Numerical Investigation of Convective Heat Transfer and Pressure Loss in a round tube with circular ring tabulators” IJSRP, ISSN 2250-3153. Nov 2016
  • Prakash Rao C R, Bhagyashekar M S et al “Experimental Study on Intermittent Turning of Aluminum Metal Matrix Composites Using K10 Grade Carbide Inserts, International Journal of Advances in Scientific Research and Engineering, ISSN: 2454-8006, Vol. 02, Issue 08, Sep -2016.
  • Srinivas K and M.S. Bhagyashekar “Effect of Mica on Mechanical properties of filled Epoxy International Journal of Scientific & Engineering Research, Volume 7, Issue 5, p269, May-2016 ISSN 2229-5518 IJSER © 2016 http://www.ijser.org
  • Prakash Rao C R, Bhagyashekar M S, Rajagopal M S, Nagendra.R. Rao, Kishore “Effect of Tool holder over hang & Feed on Surface roughness in Turning application – an experimental approach”, International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 269 ISSN 2229-5518 IJSER © 2016 http://www.ijser.org
  •  Anish Johns, Sham Aan MP, Jobish Johns, Bhagyashekar M S, Charoen Nakason, Ekwipoo Kalkornsurapranee (2015). Optimization Study of Ammonia and Glutaraldehyde Content on Vulcanization of Natural Rubber Latex. Iranian Polymer Journal. Published Online Sept 2015
  • Prapul Chandra, Narahari G A, “Three Dimensional Analysis of Fits and Effect of Layer Orientation in Laminated Composites Under Press Fit for Static and Dynamic Stability” IJLRET ISSN 2454-5031 Vol-1, issue 3, August 2015.
  1. Srinivas, M. S. Bhagyashekar, “Effects of Mono (Al/Cu) Metallic and Hybrid (Al-Cu) Metallic Fillers on Flexural Performance of Epoxy Composites”, American Journal of Materials Science, 2015; 5(3C): 81-85, p-ISSN: 2162-9382    e-ISSN: 2162-8424.
  •  K Srinivas, M S Bhagyashekar2 “Thermal Conductivity Enhancement of Epoxy by  Hybrid Particulate Fillers of Graphite and Silicon Carbide” Journal of Minerals and Materials Characterization and Engineering, 2015, 3, 76-84 Published Online March 2015, in Sci Res http://www.scirp.org/journal/jmmcehttp://dx.doi.org/10.4236/jmmce. 2015.32010.
  • Md Atiqur Rahman, Narahari G A “Analysis of Lecturing Room Using Computational Fluid dynamics Natural and forced Ventilation”, IJERT, ISSN 22780-0181, Vol 3 Issue 3, March 2014.
  • PrakashRao.C. R, Bhagyashekar M S, Narendraviswanath. “Effect of Machining Parameters on the Surface Roughness while Turning Particulate Composites”, Procedia Engineering, 97(2014) 421-431
  1. Srinivas, Bhagyashekar.M.S. “Wear Behavior of Epoxy Hybrid Particulate composites”,Procedia Engineering, 97(2014)488-494
  • Venkatesh B N, M S Bhagyashekar “Preliminary Studies on Mechanical and Metallurgical Behaviour of Friction Stir Welded But Joint”, Procedia Engineering, 97(2014) 847-853
  • PrakashRao.C. R, Bhagyashekar.M. S, NarendraViswanath., “Studies on Intermittent Facing of Metal Matrix Composites using Cryogenic Treated Carbide Inserts” Procedia Engineering, 97(2014) 930-940
  • C.R.PrakashRao, Bhagyashekar M.S, NarendraVishwanath, “Machining Behavior of AI6061 – Fly-Ash Composites”, Procedia Material Science 5 (2014) 1593-1602.
  1. Balakrishna, Vijayanand S, Bhagyashekar.M. S, “Performance issues on AODV and DSDV for MANETS”, International Journal of Computer Engg Research Vol 2(3). PP 24-30 April 2011.
  2. Balakrishna, U. RajeswarRao, Dr. Geethanjali, Bhagyashekar.M. S, “Comparisons of SAODV and TAODV, DSR Mobile Adhoc Network Routing Protocols”,Int. J. Advanced Networking and Applications,Volume: 02 Issue: 01 Pages: 445-451 (2010)
  3. Balakrishna, U. RajeswarRao, G.A.Ramachandra, Bhagyashekar.M. S, “Trust-Based Routing Security in MANETS”, / (IJCSE) International Journal on Computer Science and Engineering Vol. 02, No. 03, 2010, 547-553
  • VeereshKumar.G. B, C.S.P. Rao, Selvaraj.N, Bhagyashekar.M.S., “Effect of SiC Reinforcement in Al6061 Alloy”, International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences” (IJ-ETA-ETS) Volume 3, Issue 1, pp.140-147, Jan 2010 – June 2010.ISSN0974-3588
  • M.S. Bhagyashekar and R.M.V.G.K. Rao” Characterization of Mechanical Behavior of Metallic and Non-metallic Particulate Filled Epoxy Matrix Composites “Journal of Reinforced Plastics and Composites, January 2010 29: 30-42, first published on November 11, 2008 doi:10.1177/0731684408095034
  • VeereshKumar.G. B, C.S.P. Rao, Bhagyashekar.M. S, Selvaraj.N, “Prediction of Wear in Al6061-SiC MMC’s using ANN”, International Journal of Computer Applications in Engineering, Technology and Sciences (IJ-CA-ETS) Volume 2, Issue 1, pp. 498-505, Oct 2009-Mar 2010, ISSN:0974-3596.
  • VeereshKumar.G. B, C.S.P.Rao, Selvaraj.N, Bhagyashekar.M. S, “Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites”, Journal of Minerals & Materials Characterization & Engineering, (JMMCE), Volume 9, no.1, pp.43-55, 2010.
  • VeereshKumar.G. B, C.S.P. Rao, Bhagyashekar.M. S, Selvaraj.N “Mechanical and Tribological Behaviour of Al7075-Al2O3 Composites”, Journal of Manufacturing Engineering, Vol 4, Issue 2, pp241-246, 2009.
  • M.S. Bhagyashekar, Kavaitha Rao, R.M.V.G.K. Rao“Studies on Rheological and Physical Properties of Metallic and Non-metallic Particulate Filled Epoxy Composites” Journal of Reinforced Plastics and Composites December 2009 vol. 28 no. 23 2869-2878,ISSN  07316844 first published online November 20, 2008,doi: 10.1177/0731684408093976)
  • Bhagyashekar. M. S, R M V.G.K Rao, “Effects of Material and Test Parameters on the Wear Behaviour of Particulate Filled Composites Part I: SiC-Epoxy and Gr-Epoxy composites”, JRPC. Vol.26, No.17, 1753-1768 Nov 2007.
  • Bhagyashekar.M. S, R M V.G.K Rao, “Effects of Material and Test Parameters on the Wear Behaviour of Particulate Filled Composites Part II: Cu-Epoxy and Al-Epoxy composites”, JRPC, Vol.26, No.17 1769-1773

Leave a Reply

Your email address will not be published. Required fields are marked *